Compare Auto Insurance Rates For Free Online
The 3 most commonly asked questions that I get are: 1. How do I know if I have a head gasket leak? […]
The 3 most commonly asked questions that I get are: 1. How do I know if I have a head gasket leak? […]
Reader Question Austin, I was wondering if maybe you could help me out. I recently purchased a 1986 Nissan 300ZX non-turbo for […]
Hey bro well I have a 1991 Honda Civic DX which was running fine till a few days ago it has been overheating and like the engine is shaking really hard also the is smoke coming from the tail pipe now any idea what it could be.
I have a 1994 Toyota Camry that started overheating about a week after I bought it. It only does this at idle speeds. I had a pressure system check done, a new thermostat put in, and a new cooling fan installed. It stopped overheating for a couple of weeks, but then started doing it again.
About two months ago the check engine light on my 1996 3.8L V6 Chevy Camaro came on. I went to an auto parts store where they read the code and told me I needed a new EGR valve because mine was only function at 10% of what it should be. Well, my mechanic disagreed, saying the EGR valve should not go bad after only 90,000 miles.
I usually get my oil changed at Jiffy Lube because they are convenient and I can’t crawl under my car and change my oil like I used to. I got it changed there a few months ago and shortly thereafter my car started to overheat and the heater stopped working. If I revved the engine really high it would cool off and if I was idling the engine would get really hot but the heater still blew cold air this was in February in Utah.
I need help with my 1989 Toyota pick-up 22r engine. Engine ran hot. I drove it home stopping to let cool many times. Changed thermostat. Worked good but a whining noise, when I first started it, came from the front of the engine….
I saw your answer to someone below after searching for a good block sealer: “If they DO suspect a blown head gasket or cracked block you might want to try a can of KW Engine Block Seal additive you can buy at your local auto supply. Drain out the coolant, add the can of additive to your radiator and drive the car for about 500 miles, then drain out the water/additive and install the proper mix of coolant and water to the radiator.